Dell 9.8(0.0) Switch User Manual


  Open as PDF
of 1905
 
A successful match with a continue clause, the route map executes the set
clauses and then goes to the specified route map entry upon execution of the
continue clause.
If the next route map entry contains a continue clause, the route map executes
the continue clause if a successful match occurs.
If the next route map entry does not contain a continue clause, the route map
evaluates normally. If a match does not occur, the route map does not
continue and falls through to the next sequence number, if one exists.
Set Clause with Continue Clause
If the route-map entry contains sets with the continue clause, set actions are
performed first then the continue clause jumps to the specified route map entry.
If a set action occurs in the first route map entry and then the same set action
occurs with a different value in a subsequent route map entry, the last set of
actions overrides the previous set of actions with the same set command.
If set community additive and set as-path prepend are configure, the
communities and AS numbers are prepended.
Related
Commands
set community — specifies a COMMUNITY attribute.
set as-path — configures a filter to modify the AS path.
description
Add a description to this route map.
Z9500
Syntax
description {description}
To remove the description, use the no description {description}
command.
Parameters
description Enter a description to identify the route map (80 characters
maximum).
Defaults none
Command
Modes
ROUTE-MAP
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
306
Access Control Lists (ACL)