Filter
Top Products
• Multi-supplicant mode authenticates every device attempting to connect to the
network on the authenticator port.
Related
Commands
show dot1x interface
dot1x mac-auth-bypass
Enable MAC authentication bypass. If 802.1X times out because the host did not respond to the Identity
Request frame, the system attempts to authenticate the host based on its MAC address.
Z9500
Syntax
dot1x mac-auth-bypass
To disable MAC authentication bypass on a port, use the no dot1x mac-auth-
bypass command.
Defaults Disabled
Command
Modes
INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.4.1.0 Introduced on the C-Series and S-Series.
Related
Commands
dot1x auth-type mab-only
200
802.1X