Filter
Top Products
Primary : 10
Isolated : 30
Community : 20
Usage
Information
Note that if the VLAN ID you enter is a primary VLAN, the entire private VLAN
output is displayed, as shown below. If the VLAN ID is a secondary VLAN, only its
primary VLAN and secondary VLAN properties are displayed, as shown in the
second Example below.
Example
Dell# show vlan private-vlan 10
Primary Secondary Type Active Ports
------- --------- --------- -------------------
10 primary Yes Te 2/1,3
102 isolated Yes Te 0/4
101 community Yes Te 2/7-10
Example
Dell#show vlan private-vlan 102
Primary Secondary Type Active Ports
------- --------- --------- --------------------
10 Primary Yes Po 1
Te 0/2
102 Isolated Yes Te 0/4
Related
Commands
private-vlan mode – sets the mode of the selected VLAN to community, isolated,
or primary.
show interfaces private-vlan – displays type and status of PVLAN interfaces.
switchport mode private-vlan – sets PVLAN mode of the selected port.
switchport mode private-vlan
Set PVLAN mode of the selected port.
Z9500
Syntax
[no] switchport mode private-vlan {host | promiscuous | trunk}
To remove PVLAN mode from the selected port, use the no switchport mode
private-vlan command.
Parameters
host Enter the keyword host to configure the selected port or
port channel as an isolated interface in a PVLAN.
promiscuous Enter the keyword promiscuous to configure the selected
port or port channel as an promiscuous interface.
trunk Enter the keyword trunk to configure the selected port or
port channel as a trunk port in a PVLAN.
1454
Private VLAN (PVLAN)