Filter
Top Products
level-1-2 Enter the keyword level-1-2 to redistribute matched
routes to IS-IS Level 1 and Level 2.
level-2 Enter the keyword level-2 to redistribute matched routes
to IS-IS Level 2.
stub-area Enter the keyword stub to redistributed matched routes to
OSPF stub areas.
Defaults Not configured.
Command
Modes
ROUTE-MAP
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Related
Commands
set automatic-tag — computes the tag value of the route.
set metric — specifies the metric value assigned to redistributed routes.
set metric-type — specifies the metric type assigned to redistributed routes.
set tag — specifies the tag assigned to redistributed routes.
set local-preference
To set the BGP LOCAL_PREF attribute for routers within the local autonomous system, configure a filter.
Z9500
Syntax
set local-preference value
To delete a BGP LOCAL_PREF attribute, use the no set local-preference
command.
324
Access Control Lists (ACL)