Filter
Top Products
Related
Commands
clear ip bgp — activates inbound policies without resetting the BGP TCP session.
capture bgp-pdu max-buffer-size
Set the size of the BGP packet capture buffer. This buffer size pertains to both IPv4 and IPv6 addresses.
Z9500
Syntax
capture bgp-pdu max-buffer-size 100-102400000
Parameters
100-10240000
0
Enter a size for the capture buffer.
Defaults 40960000 bytes
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version Description
9.2(1.0) Introduced on the Z9500.
8.2.1.0 Introduced on the E-Series ExaScale.
7.5.1.0 Introduced
Related
Commands
• show capture bgp-pdu neighbor – configures a route reflector and clients.
• capture bgp-pdu neighbor – enables capture of an IPv4 BGP neighbor packet.
capture bgp-pdu neighbor (ipv6)
Enable capture of an IPv6 BGP neighbor packet.
Z9500
Syntax
capture bgp-pdu neighbor ipv6-address direction {both | rx |
tx}
To disable capture of the IPv6 BGP neighbor packet, use the no capture bgp-
pdu neighbor ipv6-address command.
Parameters
ipv6-address Enter the IPv6 address of the target BGP neighbor.
direction {both
| rx | tx}
Enter the keyword direction and a direction— either rx
for inbound, tx for outbound, or both.
520
Border Gateway Protocol