Filter
Top Products
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
9.0.0.0 Introduced on the Z-Series.
Example
Dell# upgrade fpga-image linecard all booted
Current FPGA information in the system:
=======================================
Card FPGA Name Current Version New Version
---------------------------------------------------------------
---------
Linecard0 PORTCARD CPLD 0xac 0xb2
Linecard1 PORTCARD CPLD 0xab 0xb2
***************************************************************
********
* Warning - Upgrading FPGA is inherently risky and should *
* only be attempted when necessary. A failure at this upgrade
may *
* cause a board RMA. Proceed with caution ! *
***************************************************************
********
***************************************************************
********
* When the upgrade has successfully completed, the system will
be *
* automatically rebooted to reload the upgraded
components. *
***************************************************************
********
Upgrade CPLD image for system [yes/no]: yes
FPGA upgrade in progress!!! Please do NOT power off the unit
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Usage
Information
Do not restart the switch while an upgrade is progressing. Restarting the chassis
during an upgrade may corrupt critical boot components.
When an upgrade of FPGA devices successfully completes, the switch reloads
automatically.
80
File Management