Filter
Top Products
graceful-restart details tied to the VRF that you specify. This
information includes GR Hello, Internal State, and Event
Debug details.
all Enter the keyword all to enable debugging information that
includes all the logs that are related to graceful-restart.
events Enter the keyword events to enable debugging information
that includes logs that are related to generated events.
hello Enter the keyword hello to enable debugging information
that includes restart TLV related information.
states Enter the keyword states to enable debugging information
that includes state machine related information.
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other
platforms,refer to the relevant Dell Networking OS Command Line Reference
Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Added support for VRF. Introduced on the S6000-ON.
debug isis local-updates
To debug IS-IS local update packets, enable debugging on a specific interface and provides diagnostic
information.
Z9500
Syntax
debug isis local-updates [interface]
To turn off debugging, use the no debug isis local-updates [interface]
command.
Parameters
interface (OPTIONAL) Identifies the interface type slot/port as one of
the following:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a Port Channel interface, enter the keywords port-
channel
then a number. The range is from 1 to 128.
Intermediate System to Intermediate System (IS-IS)
1063