Filter
Top Products
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.4 Output expanded to include Piece Part ID (PPID) and eSR4
optics.
8.3.11.1 Introduced on the Z9000.
7.6.1.0 Introduced this version of the command for S-Series. S-
Series output differs from E-Series.
Usage
Information
Use the show inventory command to display information about installed
pluggable media (QSFP, SFP) on a Z9500 line card. If no optics are installed in the
fiber ports, the output displays
Media not present or accessible.
Example
(Z9000)
ct-z9000-2#show inventory
System Type : Z9000
System Mode : 1.0
Software Version : 8.3.11.3b
Unit Type Serial Number Part Number Rev Piece
Part ID
Ver Service Tag
---------------------------------------------------------------
----
* 0 Z9000-01-40GE-AC Z8FX113100314 7520052401 E
MY-08R4VK-75412-1BA-0474 A00 ABC1234
0 Z9000-PWR-AC N/A N/A N/A N/A
0 Z9000-FAN Z5FX112500170 7520051702 A
MY-08R4VK-75412-1BA-0474 A00 ABC1234
0 Z9000-FAN Z5FX113300293 7520051702 A N/A
0 Z9000-FAN Z5FX113300160 7520051702 A
MY-08R4VK-75412-1BA-0474 A00 ABC1234
0 Z9000-FAN Z5FX113300136 7520051702 A
MY-08R4VK-75412-1BA-0474 A00 ABC1234
* - Management Unit
Dell#show inventory media
Slot Port Type Media
Serial Number F10Qualified
---------------------------------------------------------------
----------------------------
2 0 QSFP 40GBASE-CR4-1M
APF12380010GM4 Yes
2 4 Media not present or accessible
2 8 Media not present or accessible
148
Control and Monitoring