Filter
Top Products
Version Description
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
Usage
Information
NOTE: For IPv6 ACLs, only IPv6 and UDP types are valid for SNMP. TCP and
ICMP rules are not valid for SNMP. In IPv6 ACLs port rules are not valid for
SNMP.
No default values exist for authentication or privacy algorithms and no default
password exists. If you forget a password, you cannot recover it; the user must be
reconfigured. You can specify either a plain-text password or an encrypted cypher-
text password. In either case, the password is stored in the configuration in an
encrypted form and displayed as encrypted in the show running-config
command.
If you have an encrypted password, you can specify the encrypted string instead of
the plain-text password. The following command is an Example of how to specify
the command with an encrypted string.
NOTE: The number of configurable users is limited to 16.
Example
Dell# snmp-server user privuser v3group v3 encrypted auth md5
9fc53d9d908118b2804fe80e3ba8763d priv des56
d0452401a8c3ce42804fe80e3ba8763d
Usage
Information
The following command is an example of how to enter a plain-text password as
the string authpasswd for user authuser of group v3group.
Example
Dell#conf
Dell(conf)# snmp-server user authuser v3group v3 auth md5
authpasswd
Usage
Information
The following command configures a remote user named n3user with a v3 security
model and a security level of authNOPriv.
Example
Dell#conf
Dell(conf)# snmp-server user n3user ngroup remote 172.31.1.3
udp-port 5009 3
auth md5 authpasswd
Related
Commands
show snmp user — displays the information configured on each SNMP user name.
snmp-server view
Configure an SNMPv3 view.
Z9500
Syntax
snmp-server view view-name oid-tree {included | excluded}
1726
Simple Network Management Protocol (SNMP) and Syslog