Filter
Top Products
• cpu sata-interface statistics: Clears sata-
interface error counter statistics.
unit unit-num Enter the unit unit-num parameters with a command
option to clear hardware statistics for a specified NPU. The
range of NPU numbers is 0 to 3. The command options are:
• counters: Clears the packets counters.
party-bus Enter the keyword party-bus with a command option to
clear hardware statistics for the party bus that links Z9500
CPUs. The command options are:
• port port-num statistics: Clears statistics on a
specified party-bus internal port.
• port all: Clear statistics on all party-bus internal ports.
rp Enter the keyword rp with a command option to clear
hardware statistics for the Route Processor. The command
options are:
• cpu data-plane statistics: Clears data-plane
statistics, including the HiGig port statistics with input/
output counters.
• cpu i2c statistics: Clears active i2c-address
statistics.
• cpu sata-interface statistics: Clears sata-
interface error counter statistics.
sfm sfm-unit-
num
Enter the keyword sfm with an Switch Fabric Module (SFM)
unit number and a command option to clear hardware
statistics from the specified SFM on the Z9500. The range of
SFM unit numbers is from 0 to 5. The command options are:
• counters: Clears the traffic counters.
Defaults none
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.0 Introduced on the Z9000.
664
Debugging and Diagnostics