Filter
Top Products
---------------------------------------------------------------
---------
CP FPGA 0x14 0x13
***************************************************************
********
* Warning - Upgrading FPGA is inherently risky and should *
* only be attempted when necessary. A failure at this upgrade
may *
* cause a board RMA. Proceed with caution ! *
***************************************************************
********
Upgrade FPGA image for system [yes/no]: yes
FPGA upgrade in progress!!! Please do NOT power off the unit
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Usage
Information
Do not restart the switch while an upgrade is progressing. Restarting the chassis
during an upgrade may corrupt critical boot components.
When an upgrade of FPGA devices successfully completes, the switch reloads
automatically.
Related
Commands
• upgrade fpga-image linecard booted — upgrades the FPGA devices in Z9500
line cards.
upgrade system
Upgrade the Dell Networking OS image on all Z9500 CPUs, including the Control Processor, Route
Processor, and line cards. To upgrade the bootflash or bootselector image, use the upgrade boot
command.
Z9500
Syntax
upgrade system {ftp: | scp: | tftp: | flash: | usbflash:} file-
url {A: |B:}
Parameters
system Enter the keyword system to upgrade the operating system
(OS) image.
ftp: file-url Enter the keyword ftp: and specify the location of the
image file in the format //userid:password@host-ip/
filepath or press Enter to launch a prompt sequence.
File Management
83