Filter
Top Products
Name/address lookup uses static mappings
Name servers are not set
Host Flags TTL Type Address
-------- ----- ---- ---- -------
ks (perm, OK) - IP 2.2.2.2
4200-1 (perm, OK) - IP 192.68.69.2
1230-3 (perm, OK) - IP 192.68.99.2
ZZr (perm, OK) - IP 192.71.18.2
Z10-3 (perm, OK) - IP 192.71.23.1
Dell#
Related
Commands
traceroute — views the DNS resolution.
ip host — configures a host.
show ip cam linecard
View CAM entries for a port pipe on a line card.
Z9500
Syntax
show ip cam linecard slot-id port-set pipe-number [ip-address
mask [longer-prefix] | ecmp-group [details | member-info] |
summary]
Parameters
slot-id Enter the slot ID of the line card. The range of Z9500 slot IDs
is from 0 to 2.
pipe-number Enter the number of a line card’s port-pipe. The range is
from 0 to 3.
ip-address
mask [longer-
prefix]
(OPTIONAL) Enter the IP address and mask of a route to
CAM entries for that route only. Enter the keyword longer-
prefixes to view routes with a common prefix.
ecmp-group
{details |
member-info}
(OPTIONAL) Enter the keyword ecmp-group and specify if
you want to display detailed CAM information about an
ECMP group or about individual ECMP-group member ports.
summary (OPTIONAL) Enter the keyword summary to view a table
listing route prefixes and the total number of routes that can
be entered into the CAM.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
IPv4 Routing
967