Filter
Top Products
Defaults Display interface statistics from all Z9500 CPUs.
Command
Modes
EXEC
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series
6.2.1.1 Introduced on the E-Series.
Usage
Information
Traffic statistics are sorted on a per-interface basis; the interface receiving the most
traffic is displayed first. All CPU and port information is displayed unless a specific
port or CPU is specified. Traffic information is displayed for router ports only; not
for management interfaces.
Example
Dell#show cpu-traffic-stats cp
-- Partybus ethernet statistics --
Link state : Up
Recv Interrupts/Polls: 0
Recv Packets : 2027080 Transmit Packets :
590000
Recv Desc Error : 0 Transmit Desc
Error : 0
Recv Out of Mem : 0 Transmit Out of
Mem : 0
Recv Upper Layer Full: 0 Transmit Pause
Pkts : 0
Recv Other Error : 0 Transmit Other
Error: 0
Recv Restarts : 0
Recv Restarts Fatal : 0
-- Dataplane ethernet statistics --
bc pci driver statistics for device:
rxHandle :0
noMhdr :0
noMbuf :0
noClus :0
recvd :0
dropped :0
recvToNet :0
rxError :0
rxDatapathErr :0
rxPkt(COS0) :0
rxPkt(COS1) :0
142
Control and Monitoring