Filter
Top Products
Example
(Linecard:
Backplane-link
Status)
Dell#show hardware linecard 0 bp-link-state
Total valid Links - 39
Valid Link bmp -
0xfc0003f0-000fc000-3f0000fc-0003f000-00380000
Valid Link bmp State -
0xf40003f0-000fc000-3d0000fc-0003f000-00380000
Example
(Linecard Unit
Port: HiGig Port
Statistics)
Dell#show hardware linecard 0 hg-stats unit 1 port 50
Higig Port Statistics:
HiGigabitEthernet 0/1/50,
Input Statistics:
0 packets, 0 bytes
0 64-byte pkts, 0 over 64-byte pkts, 0 over 127-byte pkts
0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-
byte pkts
0 Multicasts, 0 Broadcasts
0 runts, 0 giants, 0 throttles
0 CRC, 0 overrun, 0 discarded
Output Statistics:
0 packets, 0 bytes 0 underruns
0 64-byte pkts, 0 over 64-byte pkts, 0 over 127-byte pkts
0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-
byte pkts
0 Multicasts, 0 Broadcasts 0 Unicasts
0 throttles, 0 discarded, 5208131494077267968 collisions
19141612676317184 wredDrops
Rate info (interval 15 seconds):
Input 00.00 Mbits/sec, 0 packets/sec, 0.00% of
line-rate
Output 00.00 Mbits/sec, 0 packets/sec, 0.00% of
line-rate
Related
Commands
clear hardware system-flow — clears the statistics from selected hardware
components.
show system — displays the current status of all the stack members or a specific
member.
show hardware counters interface
Display the counter information for a specific interface.
Syntax
show hardware counters interface interface
Parameters
counters Enter the keywords counters to display counter value for
the specified linecard the port pipe.
interface
interface
Enter any of the following keywords and slot/port or number
information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
682
Debugging and Diagnostics