Filter
Top Products
clear hardware vlan-counters
Clear VLAN statistics.
Syntax
clear hardware vlan-couters vlan-id
Parameters
vlan-id Enter the interface VLAN number. The range is from 1 to
4094.
Defaults none
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.7(0.0) Introduced this command.
remote-exec
Debug and troubleshoot switch hardware using remote commands.
WARNING: Use the remote-exec command only with the guidance of an engineer from Dell
Networking Technical Support.
Z9500
Syntax
remote-exec {cp | rp | linecard slot-id} hw-command
Parameters
cp Enter the keyword cp to troubleshoot Control Processor
CPU operation.
rp Enter the keyword rp to troubleshoot Route Processor CPU
operation.
linecard slot-id Enter the linecard slot-id to troubleshoot line-card
CPU operation. The range of line-card slot IDs is from 0 to 2.
Each line-card CPU processes packets on the corresponding
Z9500 line card.
hw-command Enter the debug command that Dell Networking Tech
Support gives you.
Defaults none
666
Debugging and Diagnostics