Filter
Top Products
Field Description
• * means synchronized to this peer.
• # means almost synchronized to this peer.
• + means the peer was selected for possible
synchronization.
• - means the peer is a candidate for selection.
• ~ means the peer is statically configured.
remote Displays the remote IP address of the NTP peer.
ref clock Displays the IP address of the remote peer’s reference clock.
st Displays the peer’s stratum, that is, the number of hops
away from the external time source. A 16 in this column
means the NTP peer cannot reach the time source.
when Displays the last time the switch received an NTP packet.
poll Displays the polling interval (in seconds).
reach Displays the reachability to the peer (in octal bitstream).
delay Displays the time interval or delay for a packet to complete
a round-trip to the NTP time source (in milliseconds).
offset Displays the relative time of the NTP peer’s clock to the
switch clock (in milliseconds).
disp Displays the dispersion.
Example
Dell#show ntp associations
remote ref clock st when poll reach delay offset disp
=============================================================
10.10.120.5 0.0.0.0 16 - 256 0 0.00 0.000 16000.0
*172.16.1.33 127.127.1.0 11 6 16 377 -0.08 -1499.9
104.16
172.31.1.33 0.0.0.0 16 - 256 0 0.00 0.000 16000.0
192.200.0.2 0.0.0.0 16 - 256 0 0.00 0.000 16000.0
* master (synced), # master (unsynced), + selected, - candidate
Dell#
Related
Commands
show ntp status — displays the current NTP status.
show ntp vrf associations
Displays the NTP servers configured for the VRF instance <vrf-name>.
Syntax show ntp [vrf] <vrf-name> associations.
1800
System Time and Date