Filter
Top Products
show cam mac linecard (dynamic or static)
Display the CAM size and the portions allocated for MAC addresses and for MAC ACLs.
Z9500
Syntax
show cam mac linecard slot-id port-set port-pipe [address
mac_addr | dynamic | interface interface | static | vlan vlan-
id]
Parameters
linecard slot-id (REQUIRED) Enter the keyword linecard then a slot
number to select the linecard for which to gather
information. The range of Z9500 slot IDs are from 0 to 2.
port-set port-
pipe
(REQUIRED) Enter the keywords port-set then a port-pipe
number to specify the port pipe for which to gather
information. The range of port pipe numbers is from 0 to 3.
address mac-
addr
(OPTIONAL) Enter the keyword address then a MAC
address in the nn:nn:nn:nn:nn:nn format to display
information on that MAC address.
dynamic (OPTIONAL) Enter the keyword dynamic to display only
those MAC addresses the switch dynamically learns.
interface
interface
(OPTIONAL) Enter the keyword interface then the
interface type, slot and port information:
• For a Port Channel interface, enter the keywords port-
channel then a number.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
static (OPTIONAL) Enter the keyword static to display only those
MAC addresses specifically configured on the switch.
vlan vlan-id (OPTIONAL) Enter the keyword vlan then the VLAN ID to
display the MAC address assigned to the VLAN. The range is 1
to 4094.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Layer 2
1147