Dell 9.8(0.0) Switch User Manual


  Open as PDF
of 1905
 
Line Description
CRC = packets with CRC/FCS errors
overrun = number of packets discarded due to FIFO
overrun conditions
discarded = the sum of runts, giants, CRC, and
overrun packets discarded without any processing
Output Statistics: Displays output statistics sent out of the interface including:
Number of packets, bytes, and underruns out of the
interface
Packet size and the number of those packets outbound
to the interface
Number of Multicast, Broadcast, and Unicast packets:
Multicasts = number of MAC multicast packets
Broadcasts = number of MAC broadcast packets
Unicasts = number of MAC unicast packets
Number of VLANs, throttles, discards, and collisions::
Vlans = number of VLAN tagged packets
throttles = packets containing PAUSE frames
discarded = number of packets discarded without
any processing
collisions = number of packet collisions
wred=count both packets discarded in the MAC and
in the hardware-based queues
Rate information... Estimate of the input and output traffic rate over a
designated interval (30 to 299 seconds). Traffic rate is
displayed in bits, packets per second, and percent of line
rate.
Time since... Elapsed time since the last interface status change
(hh:mm:ss format).
Example
Dell# show interfaces
TenGigabitEthernet 2/0 is down, line protocol is down
Hardware is DellForce10Eth, address is 74:86:7a:ff:6f:18
Current address is 74:86:7a:ff:6f:18
Pluggable media present, Media type is unknown
Wavelength is 0.00nm
Interface index is 151060994
Internet address is not set
MTU 1554 bytes, IP MTU 1500 bytes
LineSpeed 10000 Mbit
Flowcontrol rx on tx off
ARP type: ARPA, ARP Timeout 04:00:00
Last clearing of "show interface" counters 00:08:58
Queueing strategy: fifo
Input Statistics:
0 packets, 0 bytes
0 64-byte pkts, 0 over 64-byte pkts, 0 over 127-byte pkts
0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-
Interfaces
869