Dell 9.8(0.0) Switch User Manual


  Open as PDF
of 1905
 
Field Description
“Timers” Lists the values for the following bridge timers: hold time,
topology change, hello time, max age, and forward delay.
“Times” List the number of seconds since the last:
hello time
topology change
notification
aging
“Port 1...” Displays the Interface type slot/port information and the
status of the interface (Disabled or Enabled).
“Port path...” Displays the path cost, priority, and identifier for the
interface.
“Designated
root...”
Displays the priority and MAC address of the root bridge of
the STG that the interface belongs.
“Designated
port...”
Displays the designated port ID.
Example
Dell#show spanning-tree 0
Executing IEEE compatible Spanning Tree Protocol
Bridge Identifier has priority 32768, Address 0001.e800.0a56
Configured hello time 2, max age 20, forward delay 15
We are the root of the spanning tree
Current root has priority 32768 address 0001.e800.0a56
Topology change flag set, detected flag set
Number of topology changes 1 last change occurred 0:00:05 ago
from TenGigabitEthernet 1/3
Timers:hold 1, topology change 35
hello 2, max age 20, forward_delay 15
Times:hello 1, topology change 1, notification 0, aging 2
Port 26 (TenGigabitEthernet 1/1) is Forwarding
Port path cost 4, Port priority 8, Port Identifier 8.26
Designated root has priority 32768, address 0001.e800.0a56
Designated bridge has priority 32768, address 0001.e800.0a56
Designated port id is 8.26, designated path cost 0
Timers: message age 0, forward_delay 0, hold 0
Number of transitions to forwarding state 1
BPDU: sent:18, received 0
The port is not in the portfast mode
Port 27 (TenGigabitEthernet 1/2) is Forwarding
Port path cost 4, Port priority 8, Port Identifier 8.27
Designated root has priority 32768, address 0001.e800.0a56
Designated bridge has priority 32768, address 0001.e800.0a56
Designated port id is 8.27, designated path cost 0
Timers: message age 0, forward_delay 0, hold 0
Number of transitions to forwarding state 1
BPDU: sent:18, received 0
The port is not in the portfast mode
Port 28 (TenGigabitEthernet 1/3) is Forwarding
Spanning Tree Protocol (STP)
1779