Filter
Top Products
When you try to create more than the permitted number of sessions, the following
message appears, prompting you to close one of your existing sessions. Close any
of your existing sessions to log in to the system.
$ telnet 10.11.178.14
Trying 10.11.178.14...
Connected to 10.11.178.14.
Escape character is '^]'.
Login: admin
Password:
Maximum concurrent sessions for the user reached.
Current sessions for user admin:
Line Location
2 vty 0 10.14.1.97
3 vty 1 10.14.1.97
4 vty 2 10.14.1.97
5 vty 3 10.14.1.97
Clear existing session? [line number/Enter to cancel]:
Related
Commands
login statistics — Enable and configure user login statistics on console and virtual
terminal lines.
show login statistics — Displays login statistics of users who have used the console
or virtual terminal lines to log in to the system.
login statistics
Enable and configure user login statistics on console and virtual terminal lines.
Syntax
login statistics {enable | time-period days}
no login statistics {enable | time-period days}
Parameters
enable
Enables user login statistics. By default, the system displays
the login statistics for the last 30 days.
time-period
days
Sets the number of days for which the system stores the user
login statistics. The range is from 1 to 30.
Defaults Not configured
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Control and Monitoring
123