Filter
Top Products
policy-aggregate — allows an aggregate method of configuring per-port QoS
using policy maps.
service-policy output — applies an output policy map to the selected interface.
qos-policy-input
Create a QoS input policy on the router.
Z9500
Syntax
qos-policy-input qos-policy-name [layer2] [cpu-qos]
To remove an existing input QoS policy from the router, use the no qos-policy-
input
qos-policy-name [layer2] [cpu-qos] command.
Parameters
qos-policy-
name
Enter the name for the policy map in character format (32
characters maximum).
layer2 (OPTIONAL) Enter the keyword layer2 to specify a Layer 2
Class Map. The default is Layer 3.
cpu-qos Enter the keyword cpu-qos to create a QoS input policy to
be used to rate-limit control-plane traffic (CoPP).
Defaults Layer 3
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Policy name character limit increased from 16 to 32.
7.6.1.0 Introduced on the C-Series and S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.1 Introduced on the E-Series.
Quality of Service (QoS)
1501