Filter
Top Products
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.5(0.1) Added support for roles on the Z9500.
9.5(0.0) Added support for roles on the Z9000, S6000, S4820T,
S4810, and MXL
9.2(1.0) Introduced on the Z9500.
8.3.11.1 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.3.1.0 Introduced on the E-Series.
Usage
Information
In the example below, TACACS+ accounting is used to track all usage of EXEC
command and commands on privilege level 15.
Privilege level 15 is the default. If you want to track usage at privilege level 1 for
example, use the aaa accounting command 1 command. If you want to track
usage by role name for the
secadmin, for example, use aaa accounting
command role secadmin.
Example
Dell(conf)# aaa accounting exec default start-stop tacacs+
Dell(conf)# aaa accounting command 15 default start-stop tacacs
+
Dell(conf)# aaa accounting command role secaadmin default
start-stop tacacs+
Related
Commands
enable password — changes the password for the enable command.
login authentication — enables AAA login authentication on the terminal lines.
password — creates a password.
tacacs-server host — specifies a TACACS+ server host.
Security
1599