Filter
Top Products
clear ip msdp statistic
Clears the entire source-active cache, the source-active entries of a particular multicast group, rejected,
or local source-active entries.
Z9500
Syntax
clear ip msdp sa-cache [group-address | rejected-sa | local]
Parameters
group-address Enter the group IP address in dotted decimal format
(A.B.C.D.).
rejected-sa Enter the keyword rejected-sa to clear the cache source-
active entries that are rejected because the RPF check failed,
an SA filter or limit is configured, the RP or MSDP peer is
unreachable, or because of a format error.
local Enter the keyword local to clear out local PIM advertised
entries. It applies the redistribute filter (if present) while
adding the local PIM SA entries to the SA cache.
Defaults Without any options, this command clears the entire source-active cache.
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.5(0.1) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.1 Introduced on the S4810.
7.8.1.0 Added the local option.
7.7.1.0 Added the rejected-sa option.
6.2.1.1 Introduced
1218
Multicast Source Discovery Protocol (MSDP)