Filter
Top Products
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Added the kbps option on the C-Series, E-Series, and S-
Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.1 Introduced on the E-Series.
Usage
Information
The default burst size is 100Kb. If a different value is required, you must configure
the burst size to the required value.
Related
Commands
rate shape — shapes traffic output as part of the designated policy.
qos-policy-input — creates a QoS output policy.
rate-shape
Shape traffic output as part of an output QoS policy.
Z9500
Syntax
rate-shape {kbps | pps} peak-rate {burst-kbps | burst-packets}
[committed {kbps | pps} committed-rate {burst-kbps | burst-
packets}]
Parameters
kbps Enter the keyword kbps to specify the rate limit in kilobits
per second (Kbps). The range is from 0 to 40000000.
pps Enter the keyword pps to specify the rate limit in packets per
second (pps). The range is from .
burst-kbps Enter the peak rate or committed rate size in kilobits per
second. The range is from . The default is .
burst-packets Enter the peak rate or committed rate size in packets per
second. The range is from . The default is .
Defaults
Command
Modes
QOS-POLICY-OUT
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
1504
Quality of Service (QoS)