Filter
Top Products
Version Description
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Introduced.
Usage
Information
By default, when rate policing and shaping, the system does not include the
Preamble, SFD, or the IFG fields. These fields are overhead; only the fields from
MAC destination address to the CRC are used for forwarding and are included in
these rate metering calculations.
service-class bandwidth-percentage
Specify a minimum bandwidth for queues.
Z9500
Syntax
service-class bandwidth-percentage queue0 percentage queue1
percentage queue2 percentage queue3 percentage
Parameters
percentage Enter the bandwidth-weight as a percentage. The range is
from 1 to 100.
Defaults none
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.1 Introduced on the S4810.
8.2.1.0 Introduced on the C-Series and S-Series.
Usage
Information
Guarantee a minimum bandwidth to different queues globally using the service-
class bandwidth-percentage
command from CONFIGURATION mode. The
command is applied in the same way as the bandwidth-percentage command
in an output QoS policy. The
bandwidth-percentage command in QOS-
1474
Quality of Service (QoS)