Filter
Top Products
show protocol-queue-mapping
Display the Z9500 protocol-queue mapping for each configured protocol.
Z9500
Syntax
show protocol-queue-mapping [queue-id queue-number]
Parameters
queue-id
queue-number
(Optional) Display the protocol-queue mapping for a
specified control-plane queue. The range of CPU queue
numbers is from 0 to 23.
Defaults Not configured.
Command
Modes
EXEC Privilege
Usage
Information
The show output displays information on CPU traffic flows for all protocols,
including the ingress queue at which the traffic is queued and the CPU to which
protocol traffic is sent with the applied rate limits (configured or default) in kilobits
per second (kbps). The egress port queues on CPUs are abbreviated as: RP (Route
Processor), CP (Control Processor), and LC (line card).
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.8.0 Introduced on the S4810.
Example
Dell# show protocol-queue-mapping
CommitRate Peak Rate
CommitBurst PeakBurst
Protocol Queue EgPort (kbps)
(kbps) (kb) (kb)
-------- ----- ------ -------- -------
--------- -------
STP Q15 RP 150
150 1000 1000
LLDP Q7 CP 500
500 1000 1000
PVST Q14 RP 200
200 1000 1000
LACP Q15 RP 500
500 1000 1000
ARP Q2/Q10/Q3/Q11 CP/RP 600
600 1000 1000
Control Plane Policing (CoPP)
603