Filter
Top Products
Version Description
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
Related
Commands
show hardware — displays the data plane or management plane input and output
statistics of the designated component of the designated stack member.
clear hardware system-flow
Clear system-flow statistics from a specified line card.
Z9500
Syntax
clear hardware system-flow layer2 linecard slot-id port-set
port-pipe counters
Parameters
linecard slot-id Enter the linecard slot-id parameters to identify the
Z9500 line card on which you want to clear system-flow
statistics. The range of slot IDs is from 0 to 2.
port-set port-
pipe counters
Enter the keywords port-set along with a port-pipe
number, then the keyword counters to clear the system-flow
counters on the selected port-pipe. The range of port-pipe
numbers is: 0 to 2 on line card 0 and 0 to 3 on line cards 1
and 2.
Defaults none
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.0 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
Related
Commands
show hardware — displays the data plane or management plane input and output
statistics for a specified hardware component.
Debugging and Diagnostics
665