Filter
Top Products
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000, S6000-ON, and Z9500 switch..
Usage
Information
This command takes effect only after reboot.
Related
Commands
show hardware forwarding-table mode — displays the hardware forwarding table
mode in the current boot and in the next boot.
show hardware forwarding-table mode
Display the hardware forwarding table mode in the current boot and in the next boot.
Syntax
show hardware forwarding-table mode
Defaults none
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0) Introduced on the S6000, S6000-ON, and Z9500 switch.
Example
Dell#show hardware forwarding-table mode
Current Settings Next Boot
Settings
Mode : Default scaled-l3-
hosts
L2 MAC Entries : 160K 96K
L3 Host Entries : 144K 208K
L3 Route Entries : 16K 16K
Dell#
Related
Commands
hardware forwarding-table mode — selects the mode to initialize the maximum
scalability size for L2 MAC table or L3 Host table or L3 Route table.
588
Content Addressable Memory (CAM)