Filter
Top Products
community
vlan-id
(OPTIONAL) Enter the keyword community and a PVLAN ID
number to display the configuration for a community PVLAN.
interface
interface
(OPTIONAL) Enter the keyword interface followed by the
interface type and slot/port numbers or port-channel
number to display the PVLAN configuration for a member
interface. The range of Z9500 slot IDs is 0 to 2. The valid
values are:
• port-channel port-channel-number
• tengigabitethernet slot/port
• fortygigE slot/port
isolated (OPTIONAL) Enter the keyword isolated and a PVLAN ID
number to display the configuration of an isolated PVLAN.
mapping (OPTIONAL) Enter the keyword mapping to display the
community and isolated PVLAN mapping to primary PVLANs.
primary vlan-id (OPTIONAL) Enter the keyword primary and a PVLAN ID
number to display the configuration of a primary PVLAN.
Defaults none
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.2(1.0) Introduced on the Z9500.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.1 Introduced on the S4810.
Version 7.8.1.0 Introduced on the C-Series and S-Series.
Usage
Information
Examples of all types of command output are shown below. The first type of
output is the result of not entering an optional keyword. It displays a detailed list of
all PVLANs and their member VLANs and interfaces. The other types of output
show details about PVLAN subsets.
The following describes the show private-vlan command shown in the
Examples below.
1452
Private VLAN (PVLAN)