Filter
Top Products
* automatically rebooted to reload the upgraded
components. *
************************************************************
Upgrade CPLD image for system [yes/no]: yes
FPGA upgrade in progress!!! Please do NOT power off the unit
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Usage
Information
Do not restart the switch while an upgrade is progressing. Restarting the chassis
during an upgrade may corrupt critical boot components.
When an upgrade of CPLD devices successfully completes, the switch reloads
automatically.
Related
Commands
• upgrade fpga-image system fpga — upgrades the CPLD devices in all Z9500
CPUs.
upgrade fpga-image system fpga booted
Use this command to upgrade the FPGA devices in the Z9500 Route Processor and Control Processor
CPUs using the currently running Dell Networking operating-system image (and only when required by
the upgrade procedure in the Z9500 release notes).
Z9500
Syntax
upgrade fpga-image system fpga booted
Defaults none
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
9.0.0.0 Introduced on the Z-Series.
Example
Dell# upgrade fpga-image system fpga booted
Current FPGA information in the system:
=======================================
Card FPGA Name Current Version New Version
82
File Management