Filter
Top Products
show license
Check the status of a Z9500 license and display the number of usable ports or verify a license stored on a
remote server before you install it.
Z9500
Syntax
show license [flash://filepath | ftp://userid:password@host-ip/
filepath | scp://userid:password@hostip/filepath | tftp://host-
ip/filepath | usbflash://filepath]
Parameters
flash://filepath Enter flash://filepath to display a license stored in a
local flash directory on the switch.
ftp://
userid:passwor
d@host-ip/
filepath
Enter ftp://userid:password@host-ip/filepath to
display a license stored on a remote file server using FTP.
scp://
userid:passwor
d@hostip/
filepath
Enter scp://userid:password@hostip/filepath to
display a license stored on a remote file server using secure
copy.
tftp://host-ip/
filepath
Enter tftp://host-ip/filepath to display a license
stored on a remote file server using TFTP.
usbflash://
filepath
Enter usbflash://filepath to display a license stored on
an external flash device.
Defaults None
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.5(0.1) Introduced on the Z9500.
Usage
Information
In the show license command syntax, host-ip is either an IPv4 dotted decimal
address or an IPv6 [x:x:x:x::x] format address.
The following examples show sample output.
Pay As You Grow
1371