Filter
Top Products
send-stats Enter the keyword send-stats to display information on
IPC sender-side messages.
cp Enter the keyword cp to view IPC message statistics on the
Control Processor CPU.
rp Enter the keyword rp to view IPC message statistics on the
Route Processor CPU.
linecard slot-id Enter the slot ID of the line card for which you want to view
IPC message statistics. The range of Z9500 slot IDs is from 0
to 2. Enter linecard all to view IPC statistics for all line
cards.
Defaults Display IPC message statistics on all Z9500 CPUs: Control Processor, Route
Processor, and line cards.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series and E-Series.
Usage
Information
Important Points:
• Use show processes ipc commands only when you are working directly
with Dell Technical Support to troubleshoot a problem.
Example: show
processes ipc
send-stats
Dell#show processes ipc send-stats rp
IPC Send Statistics on RP
Memory Used by Send DB on this processor: 1451880 bytes
SeqNo - Last sent guaranteed IPC pkt sequence no from this
source to destination
Success - No of successfull guaranteed IPC packets sent from
source to destination
1st-R - No of first retry attempts
2nd-R - No of second retry attempts
Fails - No of guaranteed IPC pkts that could not be
transmitted
Control and Monitoring
157