Filter
Top Products
DS33R11 Ethernet Mapper with Integrated T1/E1/J1 Transceiver
198 of 344
Register Name:
SU.TxBytesOkCtr
Register Description:
MAC Bytes Transmitted OK Counter
Register Address:
030Ch (indirect)
030Ch:
Bit # 31 30 29 28 27 26 25 24
Name
TXBYTEOK31 TXBYTEOK30 TXBYTEOK29 TXBYTEOK28 TXBYTEOK27 TXBYTEOK26 TXBYTEOK25 TXBYTEOK24
Default 0 0 0 0 0 0 0 0
030Dh:
Bit # 23 22 21 20 19 18 17 16
Name
TXBYTEOK23 TXBYTEOK22 TXBYTEOK21 TXBYTEOK20 TXBYTEOK19 TXBYTEOK18 TXBYTEOK17 TXBYTEOK16
Default 0 0 0 0 0 0 0 0
030Eh:
Bit # 15 14 13 12 11 10 09 08
Name
TXBYTEOK15 TXBYTEOK14 TXBYTEOK13 TXBYTEOK12 TXBYTEOK11 TXBYTEOK10 TXBYTEOK9 TXBYTEOK8
Default 0 0 0 0 0 0 0 0
030Fh:
Bit # 07 06 05 04 03 02 01 00
Name
TXBYTEOK7 TXBYTEOK6 TXBYTEOK5 TXBYTEOK4 TXBYTEOK3 TXBYTEOK2 TXBYTEOK1 TXBYTEOK0
Default 0 0 0 0 0 0 0 0
Bits 0 - 31: Bytes Transmitted OK Counter (TXBYTEOK[0:31]) 32 bit value indicating the number of bytes
transmitted and determined to be valid. Each time a valid byte is transmitted, this counter is incremented by 1. This
counter resets only upon device reset, does not saturate, and rolls-over to zero upon reaching the maximum value.
The user should ensure that the measurement period is less than the minimum length of time required for the
counter to increment 2^32-1 times at the maximum frame rate. The user should store the value from the beginning
of the measurement period for later calculations, and take into account the possibility of a roll-over to occurring.