Filter
Top Products
Configuring Switching Information
120
ProSafe M5300 Switch
Basic
From the Basic link, you can access the following pages:
• VLAN Configuration on page 120
VLAN Configuration
Use the VLAN Configuration page to define VLAN groups stored in the VLAN membership
table. Each switch in the ProSafe family supports up to 1024 VLANs. Two VLANs are created
by default:
• VLAN 1 is the default VLAN of which all ports are members.
• VLAN 2 is the default VLAN for the Auto VoIP feature.
To display the VLAN Configuration page, click Switching
VLAN Basic VLAN
Configuration.
Reset to Factory Default Settings
To reset the VLAN configuration to the default values:
1. Select the Reset Configuration check box.
2. Confirm the action.
3. Click the APPLY button.
All VLAN configuration parameters will be reset to their factory default values. Also, all
VLANs, except for the default VLAN, will be deleted. The factory default values are:
• All ports are assigned to the default VLAN of 1.
• All ports are configured with a PVID of 1.
• All ports are configured to an Acceptable Frame Types value of Admit All Frames.