Filter
Top Products
Maintenance
488
ProSafe M5300 Switch
• Tech Support - Specify Tech Support to retrieve the switch information needed for
trouble-shooting.
The factory default is Archive.
2. Use Transfer Mode to specify what protocol to use to transfer the file:
• TFTP - Trivial File Transfer Protocol
• SFTP - Secure File Transfer Program
• SCP - Secure Copy
3. Use Server Address Type to specify either IPv4 or IPv6 to indicate the format of the Server
Address field. The factory default is IPv4.
4. Use Server Address to enter the IP address of the server in accordance with the format
indicated by the Seer Address Type. The factory default is the IPv4 address 0.0.0.0.
5. Use Remote File Name to enter the name of the file you want to download from the server.
You may enter up to 32 characters. The factory default is blank.
6. Use User Name to enter the user name for remote login to SFTP/SCP server where the file
will be sent. This field is visible only when SFTP or SCP transfer modes are selected.
7. Use Password to enter the password for remote login to SFTP/SCP server where the file
will be sent. This field is visible only when SFTP or SCP transfer modes are selected.
8. The last row of the table is used to display information about the progress of the file transfer.
HTTP File Upload
To display the HTTP File Upload page, click Maintenance Upload HTTP File Upload.
1. Use File Type to specify what type of file you want to upload:
• Archive - Specify archive (STK) code when you want to retrieve from the operational
flash:
• Image1 - Specify the code image1 when you want to retrieve.
• Image2 - Specify the code image2 when you want to retrieve.
• CLI Banner - Specify CLI Banner when you want retrieve the CLI banner file.
• Startup Configuration - Specify configuration when you want to retrieve the stored
configuration.
• Text Configuration - Specify configuration in text mode when you want to retrieve the
stored configuration.
• Script File - Specify script file when you want to retrieve the stored configuration.