Filter
Top Products
Configuring System Information
64
ProSafe M5300 Switch
5. In the Preferences field, specify the preference value used by clients to determine
preference between multiple DHCPv6 servers. The values allowed are between 0 to
4294967295. The default value is 0.
6. Click APPLY to send the updated configuration to the switch. Configuration changes take
effect immediately.
7. Click CANCEL to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
DHCPv6 Bindings Information
To display the DHCPv6 Bindings Information page, click System > Services > DHCPv6
Server> DHCPv6 Bindings Information. A screen similar to the following displays.
The following table describes the DHCPv6 Bindings Information fields.
Field Description
Client Address The Client's IPv6 address.
Client Interface The interface number where the client binding
occurred.
Client DUID The client's DHCPv6 unique identifier.
Prefix The IPv6 address leased to the client
Prefix Length The IPv6 mask length.
Prefix Type The type of prefix associated with this binding:
Dynamic / Manual.
Expiry Time The number of seconds until the prefix associated
with a binding will expire.
Valid Lifetime The valid lifetime value in seconds of the prefix
associated with a binding.
Prefer Lifetime The preferred lifetime value in seconds of the prefix
associated with a binding