Filter
Top Products
Managing Device Security
430
ProSafe M5300 Switch
Captive Portal Binding Configuration
You can associate a configured captive portal with a specific network (SSID). The CP feature
only runs on the interfaces you specify. A CP can have multiple interfaces associated with it,
but an interface can be associated to only one CP at a time.
To display the Captive Portal Global Configuration page, click Security
Control> Captive
Portal
CP Binding Configuration.
1. Use the CP ID pull-down list to select the CP ID for which to create or update a CP
instance.
2. Use CP Name to enter the name of the configuration. Name can contain 1 to 31
alphanumeric characters.
3. Use Port List to select the interface or interfaces.
Captive Portal Binding Table
To display the Captive Portal Binding Table page, click Security Control> Captive Portal
CP Binding Table.
Click DELETE to remove the currently selected interface.