Filter
Top Products
Configuring Switching Information
169
ProSafe M5300 Switch
MLD VLAN Configuration
To access the MLD VLAN Configuration page, click Switching Multicast MLD Snooping
MLD VLAN Configuration.
1. Use VLAN ID to set the VLAN IDs for which MLD Snooping is enabled.
2. Use Admin Mode to enable MLD Snooping for the specified VLAN ID.
3. Use Fast Leave Admin Mode to enable or disable the MLD Snooping Fast Leave Mode for
the specified VLAN ID.
4. Use Group Membership Interval to set the value for group membership interval of MLD
Snooping for the specified VLAN ID. Valid range is (Maximum Response Time + 1) to 3600.
5. Use Maximum Response Time to set the value for maximum response time of MLD
Snooping for the specified VLAN ID. Valid range is 1 to (Group Membership Interval - 1).Its
value should be less than group membership interval value.
6. Use Multicast Router Expiry Time to set the value for multicast router expiry time of MLD
Snooping for the specified VLAN ID. Valid range is 0 to 3600.
7. Click APPLY to apply the new settings to the switch. Configuration changes take effect
immediately
8. Click CANCEL to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.