Filter
Top Products
Routing
311
ProSafe M5300 Switch
Static Routes Configuration
To display the Static Routes Configuration page, click Routing Multicast Static Routes
Configuration.
To configure a static multicast route:
1. Use Source IP to enter the IP Address that identifies the multicast packet source for the
entry you are creating.
2. Use Source Mask to enter the subnet mask to be applied to the Source IP address.
3. Use RPF Neighbor to enter the IP address of the neighbor router on the path to the source.
4. Use Metric to enter the link state cost of the path to the multicast source. The range is 0 -
255 and the default is one. You can change the metric for a configured route by selecting the
static route and editing this field.
5. Use RPF Interface to select the interface number. This is the interface that connects to the
neighbor router for the given source IP address.
6. Click ADD to add a new static route to the switch.
7. Click DELETE to delete the multicast static routes selected.