Filter
Top Products
Routing
229
ProSafe M5300 Switch
Send Version Displays the version of RIP control packets the interface should send from
the pull-down menu. The value is one of the following:
• RIP-1 - send RIP version 1 formatted packets via broadcast.
• RIP-1c - RIP version 1 compatibility mode. Send RIP version 2 formatted
packets via broadcast.
• RIP-2 - send RIP version 2 packets using multicast. The default is RIP-2.
• None: no RIP control packets will be sent.
Receive Version Displays what RIP control packets the interface will accept from the
pull-down menu. The value is one of the following:
• RIP-1 - accept only RIP version 1 formatted packets.
• RIP-2 - accept only RIP version 2 formatted packets. The default is RIP-2.
• Both - accept packets in either format.
• None - no RIP control packets will be accepted.
Admin Mode Enables RIP for an interface. The default is Disable.
Link State Indicates whether the RIP interface is up or down.
Bad Packets Received The number of RIP response packets received by the RIP process which
were subsequently discarded for any reason.
Bad Routes Received The number of routes, in valid RIP packets, which were ignored for any
reason (e.g., unknown address family, or invalid metric).
Updates Sent The number of triggered RIP updates actually sent on this interface. This
explicitly does NOT include full updates sent containing new information.
Field Description