Filter
Top Products
Managing Device Security
363
ProSafe M5300 Switch
Accounting Server Configuration
Use the RADIUS Accounting Server Configuration page to view and configure various
settings for one or more RADIUS accounting servers on the network.
To access the RADIUS Accounting Server Configuration page, click Security Management
Security
RADIUS Accounting Server Configuration.
To configure the RADIUS accounting server:
1. In the Accounting Server IP Address field, specify the IP address of the RADIUS
accounting server to add.
2. In the Accounting Server Name field, enter the Name of the accounting server to add.
3. In the Port field, specify the UDP port number the server uses to verify the RADIUS
accounting server authentication. The valid range is 0–65535. If the user has READONLY
access, the value is displayed but cannot be changed.
4. From the Secret Configured menu, select Yes to add a RADIUS secret in the next field.
You must select Yes before you can configure the RADIUS secret. After you add the
RADIUS accounting server, this field indicates whether the shared secret for this server has
been configured.
5. In the Secret field, type the shared secret to use with the specified accounting server.
6. From the Accounting Mode menu, enable or disable the RADIUS accounting mode.
7. To delete a configured RADIUS Accounting server, click DELETE.
The following table describes RADIUS accounting server statistics available on the page.
Click CLEAR COUNTERS to clear the accounting server statistics.
Unknown Types The number of RADIUS packets of unknown type which were received
from this server on the authentication port.
Packets Dropped
The number of RADIUS packets received from this server on the
authentication port and dropped for some other reason.
Field Description