Filter
Top Products
Configuring Switching Information
129
ProSafe M5300 Switch
IP Subnet Based VLAN
IP Subnet to VLAN mapping is defined by configuring an entry in the IP Subnet to VLAN
table. An entry is specified via a source IP address, network mask, and the desired VLAN ID.
The IP Subnet to VLAN configurations are shared across all ports of the device.
To display the MAC Based VLAN page, click Switching
VLAN Advanced IP Subnet
Based VLAN.
To configure a VLAN based on an IP subnet:
1. Use IP Address to specify a valid IP Address bound to VLAN ID. Enter the IP Address
in dotted decimal notation.
2. Use Subnet Mask to specify a valid Subnet Mask of the IP Address. Enter the Subnet mask
in dotted decimal notation.
3. Use VLAN ID to specify a VLAN ID in the range of (1 to 4093).
4. Click ADD to add a new IP subnet-based VLAN.
5. Click DELETE to delete the IP subnet-based VLAN selected.