Filter
Top Products
Field Definition
MVR Max Multicast Groups Displays the maximum number of multicast groups that MVR supports.
MVR Current Multicast Groups Displays current number of the MVR groups allocated.
Configuring Switching Information
174
ProSafe M5300 Switch
3. Use MVR Global query response time to set the maximum time to wait for the IGMP
reports membership on a receiver port. This time applies only to receiver-port leave
processing. When an IGMP query is sent from a receiver port, the switch waits for the
default or configured MVR querytime for an IGMP group membership report before
removing the port from the multicast group membership. The value is equal to the tenths of
second. The range is from 1 to 100 tenths. The factory default is 5 tenths or one-half.
4. Use MVR Mode to specify the MVR mode of operation. The factory default is compatible.
Advanced
From the Advanced link, you can access the following pages:
• MVR Group Configuration on page 174
• MVR Interface Configuration on page 175
• MVR Group Membership on page 176
• MVR Statistics on page 176
MVR Group Configuration
To display the MVR Group Configuration page, click Switching > MVR > Advanced > MVR
Group Configuration. A screen similar to the following displays.
1. Use the MVR Group IP to specify the IP Address for the new MVR group.
2. Click ADD to add a new MVR group.
3. Click DELETE to delete a selected MVR group.
4. Click CANCEL to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
Field Definition
Status Displays the status of the specific MVR group.
Members Displays the list of ports that participate in the specific MVR group.