Filter
Top Products
Monitoring the System
472
ProSafe M5300 Switch
1. Use Admin Status to enable/disable logging to configured syslog hosts. Setting this to
disable stops logging to all syslog hosts. Disable means no messages will be sent to any
collector/relay. Enable means messages will be sent to configured collector/relays using
the values configured for each collector/relay. Enable/Disable the operation of the syslog
function by selecting the corresponding radio button.
2. Use Local UDP Port to specify the port on the local host from which syslog messages are
sent. The default port is 514. Specify the local port in the text field.
Field Description
Messages Relayed The count of syslog messages relayed.
Messages Ignored The count of syslog messages ignored.
Trap Logs
This screen lists the entries in the trap log. The information can be retrieved as a file by using
System Utilities, Upload File from Switch.
To access the Trap Logs page, click Monitoring Logs> Trap Logs.