Filter
Top Products
Monitoring the System
471
ProSafe M5300 Switch
Console Log Configuration
This allows logging to any serial device attached to the host.
To access the Console Log Configuration page, click Monitoring
Logs > Console Log
Configuration.
1. A log that is “Disabled” shall not log messages. A log that is “Enabled” shall log
messages. Enable or Disable logging by selecting the corresponding radio button.
2. Severity Filter. A log records messages equal to or above a configured severity threshold.
Select the severity option by selecting the corresponding line on the pull-down entry field.
These severity levels have been enumerated below:
• Emergency (0) - system is unusable
• Alert (1) - action must be taken immediately
• Critical (2) - critical conditions
• Error (3) - error conditions
• Warning (4) - warning conditions
• Notice(5) - normal but significant conditions
• Informational(6) - informational messages
• Debug(7) - debug-level messages
SysLog Configuration
To access the SysLog Configuration page, click Monitoring Logs > Sys Log Configuration.