Filter
Top Products
Getting Started
13
ProSafe M5300 Switch
Device View
The Device View is a Java
®
applet that displays the ports on the switch. This graphic provides
an alternate way to navigate to configuration and monitoring options. The graphic also
provides information about device ports, current configuration and status, table information,
and feature components.
The Device View is available from the System
Device View page.
The port coloring indicates whether a port is currently active. Green indicates that the port is
enabled, red indicates that an error has occurred on the port or that the link is disabled, and
black indicates that the port is not active.
The following figure shows the front-panel Device View of the M5300-52G-POE+ switch.
Stack Navigation
Front/Back View Toggle
Stack Unit ID
Open Full Stack View
Use the stack navigation buttons to view the stack master or the next/previous members in
the stack. Click Full Stack View to see the device view for each stack member on a single
page. The following figure shows the full stack view for a stack with two members.
To view the back panel of the switch, click the front/back toggle button (B or F, depending on
the current view). The following figure shows the back-panel Device View of the
M5300-52G-POE+ switch.