Filter
Top Products
Monitoring the System
481
ProSafe M5300 Switch
sFlow Receiver Configuration
Use the sFlow Receiver Configuration page to configure the sFlow Receiver.
To display the sFlow Receiver Configuration page, click Monitoring
sFlow Advanced
sFlow Receiver Configuration.
1. Receiver Index. Selects the receiver for which data is to be displayed or configured.
Allowed range is 1 to 8.
2. Use Receiver Owner to specify the entity making use of this sFlowRcvrTable entry. The
empty string indicates that the entry is currently unclaimed and the receiver configuration is
reset to default values. An entity wishing to claim an sFlowRcvrTable entry must ensure that
the entry is unclaimed before trying to claim it. The entry is claimed by setting the owner
string. The entry must be claimed before any changes can be made to other sampler
objects.
3. Use Receiver Timeout to specify the time (in seconds) remaining before the sampler is
released and stops sampling. A management entity wanting to maintain control of the
sampler is responsible for setting a new value before the old one expires. Allowed range is
0 to 4294967295 secs. A value of zero sets the selected receiver configuration to its default
values.
4. Use Maximum Datagram Size to specify the maximum number of data bytes that can be
sent in a single sample datagram. The manager should set this value to avoid fragmentation
of the sFlow datagrams. Default Value: 1400. Allowed range is 200 to 9116.
5. Use Receiver Address to specify the IP address of the sFlow collector. If set to 0.0.0.0, no
sFlow datagrams will be sent.
6. Use Receiver Port to specify the destination port for sFlow datagrams. Allowed range is 1
to 65535.
Field Description
Receiver Datagram Version The version of sFlow datagrams that should be sent.