Filter
Top Products
Routing
313
ProSafe M5300 Switch
IPv6 Multicast
The in the ProSafe M5300 switches support IPv6 multicast routing.
From the IPv6 Multicast link, you can access the following pages:
• Mroute Table on page 313
• IPv6 PIM on page 314
• MLD on page 321
• Static Routes Configuration on page 329
Mroute Table
This screen displays contents of the Mroute Table in tabular form.
To display the Mroute Table page, click Routing IPv6 Multicast Mroute Table.
Field Description
Source IP The IP address of the multicast packet source to be combined with the
Group IP to fully identify a single route whose Mroute table entry.
Group IP The destination group IP address.
Incoming Interface The incoming interface on which multicast packets for this source/group
arrive.
Outgoing Interface(s) The list of outgoing interfaces on which multicast packets for this
source/group are forwarded.
Up Time(hh:mm:ss) The time in seconds since the entry was created.
Expiry Time(hh:mm:ss) The time in seconds before this entry will age out and be removed from
the table.
RPF Neighbor The IP address of the Reverse Path Forwarding neighbor.
Protocol The multicast routing protocol which created this entry. The possibilities
are:
• PIM-DM
• PIM-SM
Flags The value displayed in this field is valid if the multicast routing protocol
running is PIMSM. The possible values are RPT or SPT. For other
protocols an “------” is displayed.