Filter
Top Products
Routing
316
ProSafe M5300 Switch
PIM Interface Configuration
To display the IPv6 PIM Interface Configuration page, click Routing IPv6 Multicast PIM
Interface Configuration.
To configure IPv6 PIM interface settings:
1. Select the check box associated with each interface you want to configure. Select the
check box in the heading row to apply the same settings to all interfaces.
2. Use Admin Mode to set the administrative status of PIM-DM for the selected interface. The
default is disable.
3. Use Hello Interval to enter the number of seconds between PIM hello messages
transmitted from the selected interface. The default value is 30. Valid values are from 10 to
3600.
Field Description
Protocol State The operational state of the PIM protocol on this interface.
IPv6 Prefix/Length The IPv6 Address Prefix and the Length of the selected interface.
Neighbor Count The number of PIM neighbors on the selected interface.
Designated Router The designated router on the selected PIM interface. For point-to-point
interfaces, this will be 0.0.0.0.