Filter
Top Products
Managing Device Security
443
ProSafe M5300 Switch
IP Rules
Use these screens to configure the rules for the IP Access Control Lists created using the IP
Access Control List Configuration screen. What is shown on this screen varies depending on
the current step in the rule configuration process.
Note: There is an implicit “deny all” rule at the end of an ACL list. This
means that if an ACL is applied to a packet and if none of the explicit
rules match, then the final implicit “deny all” rule applies and the
packet is dropped.
To display the IP Rules page, click Security
ACL> Advanced IP Rules.
To configure rules for an IP ACL:
1. To add an IP ACL rule, select the ACL ID to add the rule to, complete the fields
described in the following list, and click ADD. (Only displays ACL IDs from 1 to 99.)
2. Configure the desired criteria for the new rule:
• Rule ID - Specify a number from 1–12 to identify the IP ACL rule. You can create up
to 12 rules for each ACL.